CRPF Constable Tradesmen & Technical Recruitment 2027

Most aspirants searching for CRPF Constable Tradesmen opportunities already know the vacancy count. What they rarely find in one place is the information that actually determines whether they qualify: which trades are open, what the age and education rules are for each, and what physically happens inside the trade test room on assessment day. This article fills exactly that gap. That’s especially true when it comes to SC ST age relaxation.

From the complete trades list and eligibility breakdown to the step-by-step selection process and practical preparation advice, everything you need to make a confident, informed decision about applying is covered below. The same principle applies to 9195 vacancies notification.

What Is CRPF Constable Tradesmen Recruitment? 

CRPF Constable Tradesmen recruitment refers to the Central Reserve Police Force recruitment drive through which skilled tradespeople are inducted into the force at the constable level to support operational and logistical functions. It is distinct from combat roles; candidates are selected based on a specific trade skill rather than general military aptitude alone. It’s a detail worth keeping in mind for CRPF official notification crpf.gov.in.

The latest notification, released on 8th April 2026, announced 9,195 vacancies across Constable Technical, Tradesmen, and Pioneer posts. The 2027 notification has not been released yet. The CRPF Tradesmen trades list covers a wide range of skilled occupations, and selection concludes with placement on the CRPF merit list after all stages are cleared.

Key facts about CRPF Tradesmen recruitment 2027 at a glance (based on the 2026 cycle):

• Total vacancies: 9,195 posts for male and female candidates (9,175 Technical & Tradesmen + 20 Pioneer)

• Application window opened on 20th April 2026 and closed on 19th May 2026

• Pay scale: Pay Level-3, ranging from Rs 21,700 to Rs 69,100

CRPF Tradesmen vs. Technical Constable: Key Differences

The 2026 recruitment drive covers 9,195 posts across three categories: Constable Technical, Constable Tradesmen, and Pioneer Wing. Many aspirants treat these as interchangeable, but the differences are significant enough to change which paramilitary constable vacancy you should target.

Technical Constables typically require an ITI certificate in a specific mechanical or electrical trade, plus practical experience. Tradesmen posts cover a broader set of skills (Cook, Tailor, Barber, Carpenter), where the CRPF Constable trade test assesses hands-on craft ability rather than formal technical credentials.

So which category actually suits your background? The answer depends on your educational certificates and your readiness for CRPF Constable PET standards, since both categories share the same physical screening framework, including chest measurement standards for male candidates. Confirm the precise physical norms against the official CRPF eligibility page before applying.

Full List of Available Trades Under CRPF Constable Tradesmen Recruitment

The 2026 notification covers a wide range of skilled and semi-skilled trades across two broad groupings. Understanding each trade helps you match your existing qualifications against the CRPF Tradesmen eligibility criteria before you apply. Confirm the final trade list against the official CRPF notification on Testbook, as vacancy distribution across trades can shift between cycles.

• CT/Cook (Cook trade CRPF): Food preparation duties; 10th pass required; PET set at 1.6 km in 10 minutes for males.

• CT/Tailor: Uniform and equipment stitching; 10th pass required; PET set at 5 km in 24 minutes for males.

• CT/Barber / Hair Dresser: Grooming services; 10th pass required; 1.6 km PET category.

• CT/Washerman / Washerwoman: Laundry duties; 10th pass; 1.6 km PET category.

• CT/Carpenter: Woodwork and repair; 10th pass; 5 km PET category.

• CT/Cobbler: Footwear repair; 10th pass; 5 km PET category.

• CT/Painter: Surface painting; 10th pass; 5 km PET category.

• CT/Gardner: Grounds maintenance; 10th pass; 5 km PET category.

• CT/Water Carrier: Water supply duties; 10th pass; 1.6 km PET category.

• CT/Safai Karamchari: Sanitation; 10th pass; 1.6 km PET category.

• CT/Brass Band / Pipe Band / Bugler: Music and ceremonial duties; 10th pass; 5 km PET category.

• CT/Driver (CT/DVR): Vehicle operation; age limit 21 to 27 years as on 01/01/2026, distinct from other trades.

• Pioneer Wing (Mason / Electrician): Construction and electrical work; 10th pass with 1 year experience in the respective trade.

SC/ST candidates receive 5 years of age relaxation and OBC candidates receive 3 years across all these trades. All 9,195 vacancies span Technical, Tradesmen, and Pioneer posts combined.

Eligibility Criteria: Education, Age, and Physical Standards

Meeting the eligibility bar for CRPF Constable Tradesmen recruitment means clearing three distinct filters: education, age, and physical standards. Each filter has different thresholds depending on which trade you are applying under, so checking your fit before you apply is essential.

Educational Qualification

The baseline for most trades is matriculation, meaning a 10th-class pass or equivalent from a recognised board. For CRPF Technical Constable roles such as Motor Mechanic Vehicle (MMV), the bar is higher: candidates must hold a 2-year ITI certificate requirement from an institution recognised by the National or State Council for Vocational Training, plus one year of practical experience in the relevant trade. Pioneer Wing posts (Mason and Electrician) require a 10th pass with one year of trade experience.

Age Limits (as on 01/01/2026, 2026 cycle)

• Constable (Driver): 21 to 27 years

• All other trades and Technical posts: 18 to 23 years

Age relaxation applies as follows: SC/ST candidates receive 5 years, OBC candidates receive 3 years, and Ex-Servicemen receive 3 years after deduction of military service.

Physical Standards

Height requirements are 170 cm for male candidates and 157 cm for female candidates. The Physical Efficiency Test running standards split across two trade groups:

• CT/Driver, MMV, Carpenter, Brass Band, Pipe Band, Cobbler, Tailor, Bugler, Gardener, Painter: Male candidates run 5 km in 24 minutes; female candidates run 1.6 km in 8.5 minutes

• CT/Cook, Water Carrier, Barber, Hair Dresser, Washerman, Washerwoman, Safai Karamchari: Male candidates run 1.6 km in 10 minutes; female candidates run 1.6 km in 12 minutes

The PET is qualifying in nature, not scored. Failing it ends your candidacy regardless of performance in the written exam syllabus GK reasoning sections or the trade test. Always confirm the latest physical standards directly against the official CRPF recruitment notification, as these figures can be revised between cycles.

CRPF Constable Tradesmen Selection Process: Step by Step

The CRPF Tradesmen recruitment 2026 notification, released on 8th April 2026 for the 9,195 vacancies, outlines a six-stage selection process. Each stage is sequential, and candidates must qualify one before advancing to the next.

1. Physical Efficiency Test (PET): The Physical Efficiency Test running distance varies by trade group. For trades like Cook, Barber, and Washerman, male candidates run 1.6 km in 10 minutes; for trades like Carpenter, Tailor, and Driver, the requirement is 5 km in 24 minutes.

2. Physical Standard Test (PST): Height, chest (males) and weight are measured.

3. Computer-Based Written Test (CBT): 100 questions, 100 marks, with 0.25 negative marking per wrong answer.

4. Trade Test / Skill Assessment: A practical qualifying round specific to each trade.

5. Document Verification: Applications are verified against the CRPF Tradesmen trades list and eligibility requirements.

6. Medical Examination: Conducted after document verification.

7. Final Merit List: Drawn from CRPF Constable Tradesmen CBT scores among medically fit candidates.

Trade Test Format: What Is Assessed and How

The CRPF Constable trade test is a practical skill assessment that sits at the centre of the selection process. Understanding what each stage actually tests, and whether it eliminates or scores you, is what separates prepared candidates from those who arrive surprised.

Each stage works as follows:

1. Physical Efficiency Test (PET): Qualifying only. CRPF Constable PET standards differ by trade group: for trades such as Driver, Carpenter, and Tailor, male candidates must complete 5 km in 24 minutes, while trades like Cook and Barber require 1.6 km in 10 minutes.

2. Physical Standard Test (PST): Qualifying only.

3. Written Examination (CBT): Scored. The paper carries 100 questions for 100 marks with 0.25 negative marking per wrong answer.

4. Trade Test / Skill Assessment: Qualifying in nature. Examiners assess your hands-on competency in your declared trade directly.

5. Document Verification: Qualifying in nature. Certificates proving your 10th pass government job eligibility, age proof, and category documents are verified.

6. Medical Examination: Qualifying only.

7. Final Merit List: Built on CBT marks. Always confirm stage sequencing against the CRPF official notification at crpf.gov.in.

How to Prepare for the CRPF Constable Trade Test and PET

Preparation for this recruitment works best when you treat the physical and skill components as separate disciplines with separate training plans.

For the PET, male candidates applying for trades like Cook, Barber, and Washerman must complete 1.6 km in 10 minutes, while trades such as Carpenter, Tailor, and Painter require 5 km in 24 minutes. Build toward those exact targets in phases, not all at once.

For the skill assessment qualifying round, practice your trade under timed, examiner-style conditions. A Cook should prepare a standard dish from start to finish. A Tailor should stitch a sample seam neatly and quickly. The CRPF Tradesmen eligibility criteria extend beyond paperwork; your hands-on competence is evaluated directly in this stage.

The written Computer-Based Test carries 100 questions for 100 marks across Reasoning, General Knowledge, Mathematics, and English or Hindi, with 0.25 negative marking per wrong answer. Review the official CRPF notification for the authoritative subject list before finalising your study plan.

FAQs

What is the difference between CRPF Technical Constable and Tradesman Constable?

A CRPF Technical Constable typically requires an ITI certificate and covers trades like Motor Mechanic Vehicle or Electrician. Tradesman Constable posts such as Cook, Tailor, and Barber require a 10th pass and demonstrated practical skill in the trade.

What does the written test cover?

The Computer-Based Test has 100 questions across four subjects: General Intelligence and Reasoning, General Knowledge and General Awareness, Elementary Mathematics, and English/Hindi, each carrying 25 marks. There is 0.25 negative marking per wrong answer.

When does document verification stage happen?

Document verification occurs after the PET, PST, CBT and trade test rounds. Confirm the exact schedule against the official CRPF recruitment notification.

What are the PET running standards?

Trades like Cook and Barber require 1.6 km in 10 minutes for males, while trades like Driver and Carpenter require 5 km in 24 minutes.